兴发187老虎机_兴发娱乐187手机版

ENGLISHWelcome to 兴发187老虎机

兴发187老虎机
机构设置

Institutional settings

机械装备与控制工程系

姓 名:臧 勇

职 称:教授

学 位:硕士

所在系所:机械装备及控制工程系

行政职务:兴发187老虎机副校长

办公地点:

办公电话:

电子邮箱:yzang@ustb.edu.cn

科研方向:非线性动力学、塑性加工艺及设备、工业设备创新开发

本科生课程:现代机械设计方法、轧钢机械

研究生课程:有限单元法、机械装备力学行为

社会/学术兼职:中国冶金教育学会会长、中国高等教育学会薪酬管理研究分会副理事长。


教育经历:

1979.09-1983.07 东北重型机械学院轧钢机械专业,获学士学位

1986.09-1989.01 北京钢铁学院冶金机械专业,获硕士学位


工作经历:

1986.06-1990.07 北京钢铁学院机械系,助教

1990.07-1991.07 北京钢铁学院机械系,讲师

1991.07-1996.07 兴发187老虎机,副教授

1996.07-至今   兴发187老虎机,教授


代表性论著:

1. Mu L, Jia Z, Ma Z W, Shen F H, Sun Y K, Zang Y*. A theoretical prediction framework for the construction of a fracture forming limit curve accounting for fracture pattern transition[J]. International Journal of Plasticity, 2020, 129: 102706.

2.Li X, Zang Y*, Lian Y. An interface shear damage model of chromium coating/steel substrate under thermal erosion load[J]. Defence Technology, 2020.

3.Li X, Zang Y*, Mu L. Erosion analysis of machine gun barrel and lifespan prediction under typical shooting conditions[J]. Wear, 2019, 444-445: 203177.

4.Li X, Mu L, Zang Y*. Study on performance degradation and failure analysis of machine gun barrel[J]. Defence Technology, 2019.

5.黄金磊, 臧勇, 郜志英, 曾令强. 热轧过程中摩擦系数非对称性对轧机振动及稳定性的影响[J]. 工程科学学报, 2019, 41(11): 1465-472.

6.Guan B , Zhang C , Zang Y , et al. Model for the Whole Roller Leveling Process of Plates with Random Curvature Distribution Based on the Curvature Integration Method[J]. Chinese Journal of Mechanical Engineering, 2019, 32(1).

7.Guan B , Zang Y , Yang F , et al. Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment[J]. Strength of Materials, 2019, 51(1):40-55.

8.Mu L, Zang Y*, Wang Y, Li X L, Stemler P M A. Phenomenological uncoupled ductile fracture model considering different void deformation modes for sheet metal forming[J]. International Journal of Mechanical Sciences, 2018, 141: 408-423.

9.贾哲, 穆磊, 臧勇*.金属塑性成形中的韧性断裂微观机理及预测模型的研究进展[J].工程科学学报,2018,40(12):1454-1467.

10.Wang Y , Guan B , Mu L , et al. Equivalent Tensile Properties Analysis of the Dimpled Sheet[J]. Journal of Failure Analysis & Prevention, 2018,18:791-798.

11.Guan B, Zang Y, Han X, et al. Cold-Rolled Strip Steel Stress Detection Technology Based on a Magnetoresistance Sensor and the Magnetoelastic Effect. Sensors, 2018, 18(5).

12.Guan B , Chen B Y , Zang Y , et al. Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling[J]. Strength of Materials, 2018, 50(2).

13.王远, 臧勇, 杨晓莹. 蛋盒型结构参数对压缩特性影响规律研究[J]. 塑性工程学报, 2018, 25(01):206-211.

14.王远, 臧勇, 管奔,等. 基于单胞有限元的波纹板等效刚度特性 [J]. 北京航空航天大学学报, 2018, 044(006):1230-1238.

15.Guan B , Zang Y , Wu D , et al. Stress-inheriting behavior of H-beam during roller straightening process[J]. Journal of Materials Processing Technology, 2017, 244:253-272.

16.Mu L, Wang Y, Zang Y*, Stemler P M A. Edge fracture prediction using uncoupled ductile fracture models for DP780 sheet[J]. Journal of Failure Analysis and Prevention, 2017, 17(2): 321-329.

17.Mu L, Zang Y*, Li X L, Stemler P M A. A Micromechanically-motivated Phenomenological Model for Predicting Ductile Fracture Initiation[J]. Procedia engineering, 2017, 207: 2054-2059.

18.穆磊,臧勇*,Araujo Stemler Pedro Malaquias.一个基于孔洞演化机制的韧性断裂预测模型[J].工程科学学报,2017,39(04):557-566.

19.臧勇, 王远, 秦勤,等. 基于渐进变分法的蛋盒型结构等效刚度分析及优化[J]. 工程科学学报, 2017, 039(009): 1386-1395.

20.王远, 臧勇, 李小龙. 蛋盒型结构成形过程数值模拟研究[J]. 锻压技术, 2017(10):57-62.

21.刘晓潺, 臧勇*, 郜志英, 曾令强 等. 多方向耦合振动连轧机再生颤振建模及应用[J]. 中南大学学报 (自然科学版), 2017, 48(3): 636-642.

22.张超, 臧勇, 管奔,等. 基于曲率积分的双金属复合板辊式矫直过程解析[J]. 浙江大学学报:工学版, 2017(8).

23.Zeng L, Zang Y*, Gao Z. Hopf bifurcation control for rolling mill multiple-mode-coupling vibration under nonlinear friction[J]. Journal of Vibration and Acoustics-Transactions of the ASME, 2017, 139(6): 061015.

24.Huang J, Zang Y*, Gao Z, et al. Influence of asymmetric structure parameters on rolling mill stability[J]. Journal of Vibroengineering, 2017, 19(7):4840-4853.

25. Liu X, Zang Y*, Gao Z. Rolling mill chatter mechanism based on the unsteady lubrication performance[J]. Journal of Vibroengineering, 2017, 19(3):1569-1584.

26.Fu K, Zang Y*, Gao Z. Non-linear dynamics of inlet film thickness during unsteady rolling process[J]. Chinese Journal of Mechanical Engineering, 2016, 29(3): 522-530.

27.Zeng L, Zang Y*, Gao Z. Multiple-modal-coupling modeling and stability analysis of cold rolling mill vibration[J]. Shock and Vibration, 2016: 2347386.

28.Kang H, Shan Z, Zang Y*, et al. Effect of Yarn Distortion on the Mechanical Properties of Fiber-Bar Composites Reinforced by Three-Dimensional Weaving, Applied Composite Materials, 2016, 23(2):119-138.

29.Kang H, Shan Z, Zang Y*, et al. Effect of Yarn Distortion on the Mechanical Properties of Fiber-Bar Composites Reinforced by Three-Dimensional Weaving, Applied Composite Materials, 2016, 23(2):119-138.

30.Liu X, Zang Y*, Gao Z, et al. Time Delay Effect on Regenerative Chatter in Tandem Rolling Mills[J]. Shock & Vibration, 2016, 4025650.

31.Zeng L, Zang Y*, Gao Z, Effect of rolling process parameters on stability of rolling mill vibration with nonlinear friction, Journal of Vibroengineering, 2016,18(2): 1288-1306.

32.管奔, 臧勇, 秦勤,等. 基于H型钢残余应力主动控制的矫直工艺设计[J]. 工程科学学报, 2016, 038(001):P.128-134.

33.张超, 臧勇, 管奔,等. 双金属复合板矫直过程的弯曲及弹复解析[J]. 工程科学学报, 2016, 038(009):P.1317-1326.

34.郜志英, 臧勇*, 曾令强. 轧机颤振建模及理论研究进展[J]. 机械工程学报, 2015,51(16): 87-112.

35.曾令强, 臧勇*, 郜志英,. 刘晓潺. 轧机整体耦合建模问题研究[J], 机械工程学报. 2015, 51(14): 46-53

36.Guan B , Zang Y , Chen B , et al. Study on computer aided inspected point planning based on human-computer interaction[J]. Journal of Computational Methods in sciences and Engineering, 2015, 15(3):569-583.

37.Zeng L, Zang Y*, Gao Z, et al, Stability analysis of the rolling mill multiple-modal-coupling vibration under nonlinear friction. Journal of Vibroengineering, 2015, 17(6):2824-2836.

38.Zeng Q, Zang Y*, Qin Q, The effect of roll with passive segment on the planetary rolling process. Advances in Mechanical Engineering, 2015, 7(2).

39.管奔, 王亚飞, 臧勇. 双金属复合板的拉伸回弹特性研究[J]. 中国石油大学学报:自然科学版, 2015(2).

40.臧勇, 赵泽波, 秦勤, 于洋. 奥氏体晶粒尺寸对工艺参数的灵敏度方程及应用,浙江大学学报(工学版),2015,49(4):662-669

41.Fu K, Zang Y*, Gao Z, Partial Film Lubrication Characteristics of Inlet Zone in Cold Strip Rolling. Journal of Tribology, 2014, 136(4)::1203-1210

42.付括, 臧勇*, 郜志英. 冷轧过程中的混合润滑特性[J]. 东北大学学报(自然科学版), 2014, 35(7): 1005-1009

43.付括, 臧勇*, 郜志英. 轧制界面非稳态流体润滑轧制特性研究[J]. 兴发187老虎机学报, 2014, 36(1): 97-103

44.付括, 臧勇*, 郜志英. 轧制界面非稳态油膜润滑特性[J]. 东北大学学报(自然科学版), 2014, 35(9): 1324-1328

45.管奔, 臧勇, 秦勤,等. 大型H型钢BD轧机垂直承载系统力学行为及综合能力分析[C]// 中国冶金——“创新创意,青年先行”第七届中国金属学会青年学术会论文集. 2014.

46.臧勇, 穆磊, 吴迪平, 秦勤, 郜志英. 金属薄板滚压冲裁过程数值模拟及模具参数,兴发187老虎机学报,2013,(10):1360-1367

47.赵景云, 臧勇*, 尹德全. 孔型对H型钢开坯轧制成形的影响及优化,塑性工程学报,2013,(02):62-67

48.赵景云, 臧勇*, 吴迪平, 逄晓男, 刘福宁. H型钢万能轧制力计算方法, 中南大学学报(自然科学版),2013,(05):1829-1836

49.赵景云,臧勇*,逄晓男,吕智勇,基于流函数的H型钢轧制力能参数模型,兴发187老虎机学报,2013,(01):112-119

50.赵泽波, 臧勇*, 周昊, 于洋. 再结晶组织预测模型的缺陷及解决办法,热加工工艺,2013,(23):107-110

51.赵泽波, 臧勇*, 王婷婷, 周昊. 碳钢高温流变应力模型研究,北京工业大学学报,2013,(08):1149-1154

52.管奔, 臧勇*, 曲为壮, 吕智勇, 冯伟. 辊式矫直过程应力演变及其对反弯特性的影响,机械工程学报,2012,(02):81-86

53.管奔,臧勇*,逄晓男,吕智勇,刘福宁,冯伟. H型钢矫直过程残余应力演变机制研究,中国石油大学学报(自然科学版),2012,(05):122-128+135

54.管奔, 臧勇*, 逄晓男, 吕智勇, 曲为壮. 矫直过程截面复杂反弯的应力分布与反弯特性解析,中南大学学报(自然科学版),2012,(05):1739-1745

55.赵景云, 臧勇*. 轧制润滑对H型钢翼缘宽展的影响,重庆大学学报,2012, (10):24-29

56.管奔, 臧勇, 逄晓男, 吕智勇, 曲为壮. 矫直过程截面复杂反弯的应力分布与反弯特性解析[J]. 中南大学学报(自然科学版),2012,05:1739-1745.

57.管奔, 臧勇, 曲为壮. 矫直理论的研究发展现状与展望[J]. 机械设计与制造, 2012(08):271-273

58.臧勇, 范小彬, 王会刚. 基于信号时-频特征的轧机振动分析[J]. 振动.测试与诊断,2011,05:642-646+668.

59.Liu L, Zang Y. Hydrodynamic analysis of partial film lubrication in the cold rolling process[J].International journal of advanced manufacturing technology,2011(5):489-493

60.臧勇, 张新其, 谢志伟. 薄壁铜管游动芯头拉拔过程拉拔力影响因素分析[J]. 塑性工程学报,2010,03:143-147.

61.宋江腾, 臧勇, 崔福龙, 崔丽红. 非对称型材弯曲拉伸失稳及最小弯曲半径研究[J]. 机械强度,2010,02:275-279.

62.Sun Y, Zang Y. High precision modeling of welding and post welding cold rolling continuous process in numerical simulation[].Proceedings of the 2nd International Conference on Modelling and Simulation, 2009-05-21

63.臧勇, 戴春发, 张占柱, 李立敏. 斜辊矫直大口径薄壁铜管断面畸变的仿真分析[J]. 塑性工程学报,2009,04:116-120.

64.王永涛, 臧勇, 吴迪平, 范小彬. CSP轧机振动的振源研究[J]. 振动、测试与诊断,2008,04:395-399+416.14.   

65.崔丽红, 臧勇, 章博, 吴迪平, 秦勤, 王会刚. 多辊矫直过程中H型钢断面的应力演变规律[J]. 兴发187老虎机学报,2008,08:942-946.

66.马光亭, 臧勇, 朱国明, 康永林. H型钢万能轧制过程中金属流动的有限元分析[J]. 兴发187老虎机学报,2008,02:165-168.

67.范小彬, 臧勇, 吴迪平, 王永涛, 廖一凡, 黄志坚. CSP热连轧机振动问题[J]. 机械工程学报,2007,08:198-201.

68.范小彬, 臧勇, 王永涛, 廖一凡, 黄志坚. CSP轧机振动的测试与抑制[J]. 振动、测试与诊断,2007,02:156-158+174.

69.范小彬, 臧勇, 吴迪平, 王永涛. CSP轧机振动和振纹的试验研究[J]. 钢铁,2006,10:54-58.

70.臧勇, 王会刚, 崔福龙. 型钢辊式矫直压弯挠度的弹塑性解析[J]. 机械工程学报,2005,11:51-56.

71.韩丽琦, 臧勇, 邹家祥, 章博. 基于人工神经网络的热轧碳钢变形抗力预报[J]. 兴发187老虎机学报,2001,02:131-133.

72.臧勇, 崔超. 弧形齿联轴器轮齿载荷分布研究[J]. 钢铁, 2000, 08: 51-55.

73.臧勇. 拉伸载荷作用下套管接头的特性分析[J]. 兴发187老虎机学报,1997,S1:6-8+17.

74.臧勇, 潘小川. 油套管抗挤毁性能的初始后屈曲理论分析[J]. 兴发187老虎机学报,1997,03:291-294.

75.臧勇, 孙浩. 非对称轧制过程的参数[J]. 兴发187老虎机学报,1994,S2:33-38.